3 Stage Intake Manifold Swap

Tips:

• Replace bolts from where you get them
• Label plugs before unplugging
• Clean block

Steps:

• Unplug battery negative
• Remove hood (10mm)
• remove air filter cabin, cowl, engine cover
• Remove cross bracing
• Remove Intake box and hoses
• Remove power steering reservoir (10mm)
  • put it to the side, no need to disconnect
• Unplug a bunch of stuff on the intake including IDSA valve connections
• Remove throttle body
  • Clean
• Remove junction box (optional)
  • torx bit on each side to remove whole bracket
  • or.. PB Blaster and flat head screwdriver to pry it off. Don't break clips.
• Remove O2 sensors. Label before unplug
  • push cable down through intake manifold
  • pull out of the way from the back
• Remove PCV hose at firewall
  • release clips
• Remove fuel hose bracket @ firewall side
• Remove Manifold
  • 11mm bolts, crack then remove by hand
  • Break free
  • Unplug cables underneath
  • Remove pvc to oil pan hose

Manifold Delete complete

• Clean manifold interface