Skip to main content

3 Stage Intake Manifold Swap

Tips:

  • Replace bolts from where you get them

Steps:

  • Unplug battery negative
  • Remove hood (10mm)
  • remove air filter cabin, cowl
  • Remove cross bracing
  • Remove Intake box and hoses
  • Remove power steering reservoir (10mm)
    • put it to the side, no need to disconnect
  • Unplug a bunch of stuff on the intake including IDSA valve connections
  • Remove throttle body
    • Clean
  • Remove junction box (optional)
    • torx bit on each side to remove whole bracket
    • or.. PB Blaster and flat head screwdriver to pry it off. Don't break clips.
  • Remove O2 sensors. Label before unplug
    • push cable down through intake manifold
    • pull out of the way from the back
  • Remove PCV hose at firewall
    • release clips
Back to top